BLUGUARD SmartBus P900-V16N Uživatelský manuál stáhnout pdf (Strana 23)

version 1.1

SmartBus P900

V16

USER MANUAL

[MODE] + [#]

1. Once all setting is programmed, press [MODE] followed by [#] key to exit.

2. The POWER and SERVICE indicators will stop flashing.

3. The keypad will sound 2 beeps to confirm the exit command.

[COMMAND ADDRESS] + [NEW CODE] + [RE-ENTER NEW CODE] + [#]

1. Ensure that the system is in USER PROGRAMMING mode.

2. Enter [COMMAND ADDRESS] that you wish to change [01-14].

3. Enter the new 4-digit [USER CODE] and re-enter the new 4-digit [USER CODE] followed

by [#] key.

4. Repeat step 2-3 to enter or change other user codes.

5. If any of the user codes are not used, please ensure that they are all erased.

6. To exit user programming mode, press [MODE] followed by [#] key.

[COMMAND ADDRESS] + [NEW CODE] + [RE-ENTER NEW CODE] + [#]

1. Ensure that the system is in USER PROGRAMMING mode.

2. Enter command address [15].

3. Enter the new 4-digit [USER CODE] and re-enter the new 4-digit [USER CODE] followed

by [#] key.

4. Repeat step 2-3 to enter or change other user codes.

5. If any of the user codes are not used, please ensure that they are all erased.

6. To exit user programming mode, press [MODE] followed by [#] key.

[COMMAND ADDRESS] + [NEW CODE] + [RE-ENTER NEW CODE] + [#]

1. Ensure that the system is in USER PROGRAMMING mode.

2. Enter command address [16].

3. Enter the new 4-digit [USER CODE] and re-enter the new 4-digit [USER CODE] followed

by [#] key.

4. Repeat step 2-3 to enter or change other user codes.

5. If any of the user codes are not used, please ensure that they are all erased.

PROGRAM NEW AND CHANGING EXISTING DURESS

CODE

PROGRAM NEW AND CHANGING EXISTING DOOR ACCESS CODE

EXIT USER PROGRAMMING MODE

PROGRAM NEW AND CHANGING EXIST

ING USER CODE

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Žádné komentáře

BLUGUARD SmartBus P900-V16N Uživatelský manuál Strana 23